- 8 -
06/2020
Copyright © 2020, Fast ČR, a.s.
TROUBLESHOOTING
MALFUNCTION
POSSIBLE CAUSE
REMEDY
The motor unit is
running but the
screw shaft is not
turning.
The safety clutch is
broken.
Disassemble the grinding attachment
and thoroughly clean away any
fragments of the clutch from all its
parts. Slide a new safety clutch on to the
screw shaft.
Faulty clutch or
motor.
Contact the supplier or professional
service centre.
The motor unit is
running irregularly,
its speed is
fluctuating.
Large amount of
food is inserted or
you are pushing
down too hard on
the pusher.
Insert the food more slowly and push
gently on the pusher.
The motor unit
stops during
operation and
cannot be started.
The motor
overheated and its
overload protection
automatically shut
it off.
Turn off the meat grinder, disconnect it
from the power socket and allow it to
cool down sufficiently.
Motor malfunction. Contact the supplier or professional
service centre.
Food is not
sufficiently
defrosted.
The cross blade
is installed in the
wrong direction.
Disassemble the grinding attachment
and check the position of the cross
blade.
The cross blade is
blunt.
Have the blade professionally sharpened
or replace it with a new one.
The grinding
chamber clogs up
constantly.
The food being
ground is too big.
Cut the food into smaller pieces.
The feed tube is
overfilled.
Clean out the feed tube.
You are inserting
food too quickly
into the feed tube
or pushing down
too hard on the
pusher.
Insert the food more slowly and push
gently on the pusher.
It is possible that
a bone fragment or
another similar item
is jammed in the
grinding chamber.
Disassemble the grinding attachment
and clean it out thoroughly.
The grinder cannot
be turned on, the
motor unit does not
start rotating.
Unless there is
a power outage,
evidently the main
power switch or
power cord is
faulty.
Contact the supplier or professional
service centre.
CLEANING AND MAINTENANCE
Tip:
Remains of unground meat may remain in the grinding chamber
that are hard to clean away. To make their removal easier, you can
grind a piece of bread or bread roll. We recommend disassembling
the grinding attachment in a kitchen sink or a larger bowl to prevent
potentially soiling the work surface.
■
Before cleaning, the appliance must be turned off and disconnected from the power
socket. Never clean the grinder or its parts when it is turned on and running.
■
If the grinder is used for an extended period of time, it is possible that unit may be
hot to touch. Allow it to cool down before cleaning it.
■
Disassemble the attachment into its individual parts. Clean away any food remains,
wash in warm water with dish washing detergent and rinse under clean running
water. Then allow them to dry naturally or dry them out thoroughly using a wiping
cloth. Do not use abrasive cleaning products.
■
No part of the grinding attachment is suitable for washing in a dishwasher.
Attention:
When cleaning the cross blade
A8
, be very careful not to injure
yourself on its sharp cutting edges.
■
If food remains are left on some parts of the grinding attachment, we recommend
soaking these parts in warm water with a small amount of kitchen detergent, and to
leave them to soak for a certain time, e.g. overnight. The soaking time depends on
how soiled the accessories are.
■
To clean the outer surface of the motor unit base
A1
, use a cloth lightly dipped in
a weak detergent solution. After applying the detergent solution, wipe the surface
with a cloth lightly dampened in clean water and then wipe dry. Do not use solvents,
abrasive cleaning products, etc. for cleaning the appliance. Otherwise the surface
coat of the appliance may be damaged.
Attention:
Never submerge the motor unit base
A1
or the power cord in
water or in any other liquid.
STORAGE
■
When you have finished using the appliance, place it and its accessories in a clean,
dry place out of children‘s reach. Keep the stored appliance and its accessories away
from extreme temperatures, direct sunlight and excessive humidity and do not store
it in an overly dusty environment.
TECHNICAL SPECIFICATIONS
Rated voltage range ............................................................................................................220−240 V
Rated frequency.......................................................................................................................50–60 Hz
Rated power input ........................................................................................................................160 W
Maximum power input................................................................................................................500 W
Grinding capacity ....................................................................................................................... 30 kg/h
Maximum non-stop operating time ......................................................................................15 min
Electrical shock protection class ........................................................................................................II
Weight ................................................................................................................................................3.5 kg
Noise level ................................................................................................................................ ≤82 dB(A)
EXPLANATION OF TECHNICAL TERMINOLOGY
Safety class for electrical shock protection:
Class II – Electrical shock protection is provided by double or
heavy-duty insulation.
Amendments to text and technical parameters are reserved.
INSTRUCTIONS AND INFORMATION REGARDING THE
DISPOSAL OF USED PACKAGING MATERIALS
Dispose of used packaging material at a site designated for waste in your municipality.
DISPOSAL OF USED ELECTRICAL AND ELECTRONIC EQUIPMENT
This symbol on products or original documents means that used
electric or electronic products must not be added to ordinary
municipal waste. For proper disposal, renewal and recycling hand over
these appliances to determined collection points. Alternatively, in
some European Union states or other European countries you may
return your appliances to the local retailer when buying an equivalent
new appliance.
Correct disposal of this product helps save valuable natural resources
and prevents potential negative effects on the environment and human health, which
could result from improper waste disposal. Ask your local authorities or collection
facility for more details.
In accordance with national regulations penalties may be imposed for the incorrect
disposal of this type of waste.
For business entities in European Union states
If you want to dispose of electric or electronic appliances, ask your retailer or supplier
for the necessary information.
Disposal in other countries outside the European Union.
This symbol is valid in the European Union. If you wish to dispose of this product,
request the necessary information about the correct disposal method from the local
council or from your retailer.
This product meets all the basic requirements of EU directives related to
it.
