Sencor SLE 55F60TC, User Manual

Page: 46 / 54

44 EN
EN
06/2016
2016
Trouble shooting guide
8. Trouble shooting guide
WARNING
Under no circumstances should you try to repair the device yourself, the device
does not contain any parts that a user could repair himself. Always take the
device to the authorised service centre in case of repair, adjustment or any other
maintenance. Unauthorised intervention into the device can be considered
a breach and loss of warranty claim. Importer, supplier, distributor or seller are
not responsible for any loss caused by breach of regulations listed in this manual.
Do not open the device because of danger of electric shock. In case of device
failure, check the following problems and their solution fi rst. If you cannot solve
such problem by yourself, contact your seller.
Symptoms Possible solutions
No power. Check that the power cord is connected to the wall
power socket.
Unplug the power cord, and plug it again after
60 seconds.
No picture Check the antenna connection.
Station may be experiencing problems, tune to
another station.
Adjust the contrast and brightness.
Good picture but no sound Increase volume.
Is the sound muted? Press the MUTE button.
Check the sound setting.
If external devices are use, check their volumes are
not set too low or turned off.
If using AVI or Component inputs, make sure cables
are connected properly and not loose.
If using DVI to HDMI cable, a separate audio cable
is required. Make sure a headphone jack is not
connected.
Good sound but abnormal color
or no picture Check antenna connection and antenna condition.
If using Component input, check Component
connections, incorrect or loose connections may cause
color problems or cause the screen to be blank.