EN 19
EN
Revision 09/2021
Copyright © 2021, Fast ČR, a. s.
Other menus
Satellite setting
ALERT:
Have a professional install your satellite antenna to ensure you get quality and
uninterrupted reception. The professional will inform you about the technical
parameters (in particular DiSEqC), which he used during the installation process
and which shall be entered into the TV receiver for a successful tuning process.
• Search for Satellites
Depending on the M7 FastScan search parameters set for certain countries or
Others
,
press
OK
to perform the search.
• Manual satellite tuning
Correctly determine the received satellites and assign them to DiSEqC. You can select a
transponder to control the received signal (e.g. Astra 3/23,5° E, 12070 GHz, horizontal,
27500 kSym/s). Also set the other satellite reception-specific parameters according to the
installation that the antenna installer tells you.
• Scan Mode
For searching, select a mode between
Default/Network Scan/Blind Scan
.
Note:
Depending on the model, design, and region, all options may not be available.
Automatic Channel Update
Select
On
if you want the TV to search the channels itself for changes as instructed by
the operators.
LCN
Turn
On
if LCN is used in your country, otherwise leave it
Off
.
HbbTV
Turn on if you want to receive additional information via an Internet connection for some
programs. TV stations that broadcast this data will display their own reception alert in the
picture. Switch to this data using the
Red
button on the remote controller and continue
according to the instructions of that TV station.
Common interface
If you have inserted a conditional reception module (CAM), you can enter its menu and
set it up in the
Quick Options
, described above. Some operators require their profile to be
enabled. Follow the module instructions and operator information.
