16 EN
EN
Revision 04/2019
Copyright ©
2019, Fast ČR, a. s.
Turn on first time
Note:
When the automatic tuning does not find any receivable channel (e.g. due to poor
antenna) or you interrupted the tuning manually, you can still tune channels manually,
one by one, in the device menu described below. For this you will need some
technical information about the broadcast that you want to receive, e.g. the method of
transmission, of the channels frequency, sound modes, the transmission speed etc.
A successful completion of the automatic tuning results in saving of the list of the
available TV programs and radio stations, which you can receive immediately. In the case
of multiple occurrences of the same or similar programs (e.g. due to local variations of the
same central program or a remote reception with interference or local reception “clean”
reception) verify, which station works best for you or modify the list.
Automatic satellite tuning is adapted to tune one satellite antenna with a single LNB and
corresponds to the setting DiSEqC = None / None. If your antenna is complicated, specify
the antenna parameters (especially control LNB DiSEqC commands) by setting that the
installer of your antenna system tells you. Enter these data in the Satellite setting/Dish
Setup, described in the next section.
Copyright © 2022, Fast CR, a. s.
Revision 06/2022
