4 EN
EN
Revision 04/2019
Copyright ©
2019, Fast ČR, a. s.
Important safety instructions
•
Disconnect the power cord from the power outlet during thunderstorms, or when not
in use for a longer period of time. Avoid carrying the device from a cool environment
into a warm environment or vice versa, or operating the device in a moist
environment. Air moisture may condense in some areas within the device case and
may cause the device to become temporarily inoperable.
•
In this case, leave the device in a warm and well-ventilated area and leave for
1–2 hours until the moisture evaporates. The device can be normally used again.
Be especially cautious when using the device for the first time during a cool season
immediately after purchasing. Do not place the device on an unstable cart, stand,
console or table. The device can fall and cause serious injury to children or adults or
seriously damage the device and other objects. Only carts, stands or tables defined
by the manufacturer or sold with the device shall be used. Any assembly work with
the device shall be carried out according to the manufacturer's instructions and shall
use assembly accessories recommended by the manufacturer.
•
Do not lean against the device, do not lean over or use the device as a step. Avoid
quick movements. Make sure children do not play with the machine.
•
Be careful when moving the device when placed on a cart. Suddenly
stopping, using excessive force and uneven surfaces may cause the cart
holding the device to tip over.
•
Under no circumstances are the manufacturer or vendor liable for any
direct or indirect damage caused by the failure to observe the instructions for
installation, configuration, operation, treatment and cleaning of this device included
within this manual.
•
Protect the device against impacts, falls, blows, shocks, vibration, moisture and dust.
Do not expose the device to extreme temperatures or humidity.
Note:
If the device is powered by an adapter, only use the AC adapter and power cord
included with the device. Do not use defective sockets. Make sure the cord is properly
plugged into the socket. If the cord is loose, an electric arc can cause fire. Refer to
a qualified electrician to replace sockets.
Note:
Plug the device into a properly grounded sockets with protective grounding pin only.
Note:
If you plan to mount the device to a wall or ceiling, follow the instructions of the
manufacturer and the user's manual for the given system.
Sencor UM SLE 22F61TCS EN CZ SK HU PL.indb 4
29.04.2019 18:03:49
