- 7 -
05/2021
© 2021
CLEANING THE BODY OF THE HAIR CLIPPER
■
The hair clipper unit can be cleaned using a clean dry cloth. In the event that it is
very dirty, you can use a lightly dampened cloth. Then thoroughly wipe the cleaned
surface dry.
■
To clean the power cord, use a clean, dry cloth.
■
For cleaning, do not use brushes with hard bristles, cleaning products with an
abrasive effect, solvents, etc. Otherwise, the cleaned surface may be damaged.
LUBRICATING THE BLADE OF THE CUTTING UNITS
■
To ensure complete movement of the cutting unit, it is recommend that it is
regularly lubricated always after several sessions.
■
If an attachment is mounted on the cutting unit, remove it.
■
Apply 1 to 2 drops of oil
B7
to the blades of the cutting unit and evenly spread the
oil using a cloth. Dry off excess oil. Check that the unit is clean before using again.
Note
:
After using up the supplied oil, you can use an oil that does not contain
acids, e.g. sewing machine oil.
REPLACING THE CUTTING UNIT
■
In the event that the cutting unit
A1
is worn out, please contact an authorised
service centre.
■
If you replace the cutting unit yourself, use only original spare parts and proceed
according to the following instructions.
- Using a suitable screwdriver, loosen the screws on the underside of the cutting
unit and remove the bottom and upper part of the cutting unit.
- Attach a new upper and bottom part of the cutting unit to the body of the hair
clipper.
- Check that both parts are seated correctly. The blade must be parallel. Set the
lever
A2
to the top position and simply align the tips of the upper and lower teeth
so that the end part of the teeth of the upper part is at a distance of approximately
1.2 mm from the end part of the teeth on the bottom part.
- Attach the new cutting unit to the body of the hair clipper using screws. If you
find that the upper and bottom parts of the cutting unit are not properly aligned,
slightly loosen the screws. Adjust both parts relative to each other and retighten
the screws.
STORAGE
■
When you have finished using it, you can store the hair clipper with all its accessories
in a suitable location out of children's reach. Keep the hair clipper away from
extreme temperatures, direct sunlight and excessive humidity. Do not use in an
overly dusty environment.
TECHNICAL SPECIFICATIONS
Rated voltage range .................................................................................................... 220−240 V AC
Rated frequency........................................................................................................................50/60 Hz
Rated power input .............................................................................................................................9 W
Noise level ...................................................................................................................................72 dB(A)
Electrical shock protection class ........................................................................................................II
The declared noise emission level of the appliance is 72 dB(A), which represents a level
A of acoustic power with respect to a reference acoustic power of 1 pW.
EXPLANATION OF TECHNICAL TERMINOLOGY
Electric shock protection class:
Class II – Electrical shock protection is provided by double or
heavy-duty insulation.
Changes to text and technical parameters are reserved.
INSTRUCTIONS AND INFORMATION REGARDING THE
DISPOSAL OF USED PACKAGING MATERIALS
Dispose of used packaging material at a site designated for waste in your municipality.
DISPOSAL OF USED ELECTRICAL AND ELECTRONIC
EQUIPMENT
This symbol on products or original documents means that used
electric or electronic products must not be added to ordinary
municipal waste. For proper disposal, renewal and recycling, hand
over these appliances to determined collection points. Alternatively,
in some European Union states or other European countries you may
return your appliances to the local retailer when buying an equivalent
new appliance.
Correct disposal of this product helps save valuable natural resources
and prevents potential negative effects on the environment and human health, which
could result from improper waste disposal. Ask your local authorities or collection
facility for more details.
In accordance with national regulations penalties may be imposed for the incorrect
disposal of this type of waste.
For business entities in European Union states
If you want to dispose of electric or electronic equipment, ask your retailer or supplier
for the necessary information.
Disposal in other countries outside the European Union.
This symbol is valid in the European Union. If you wish to dispose of this product,
request the necessary information about the correct disposal method from the local
council or from your retailer.
This product meets all the basic requirements of EU directives related to
it.
