EN - 5
GETTING START PLAYER
1. ON / OFF
1.1
Plug-in earphone set into player’s earphone output jack;
1.2
Press and hold the
button, until the Status LED light up in blue, to power On the player.
1.3
The blue light will switch to blinking and then the music will play in seconds automatically.
1.4
To turn Off the Player; press and hold the
button until the status LED light fast blinking and then the Player will switch
Off in seconds.
NOTE:
If no any supported music file at the player’s memory; the status indicator light will be flashing fast and then will go Off, and the player
will turn Off in seconds automatically.
2. PLAY / PAUSE MUSIC
2.1
Press
button to pause the playing music.
2.2
Press it again to resume.
2.3
If player is in pause state for 3 minutes, it will be turned to standby Off automatically.
3. ADJUST VOLUME
3.1
Press the +/– button to increase or decrease the volume.
3.2
Press and hold +/– button to increase or decrease volume level continuously.
3.3
For the purpose of hearing protection, a sound signal is made in the headphones when the default setting level is
reached that may exceed 85 dB and upon every increase in volume thereafter. Press
button to accept the warning
and enter into the volume control for increase the level and until to maximum level.
4. PLAY NEXT / PREVIOUS MUSIC
4.1
In playing mode;
4.2
Press the button to play the next track.
