SENCOR SDN 440T
User's Manual
21
Schedule alarm
In this subsection you can turn the Schedule alarm ON or OFF. If turned on, which
is the default setting, the Schedule alarm will go off at the date and time of the
Schedule record, producing an audible beep.
Daily alarm
y
Enter the Daily alarm subsection.
9
The default values are midnight, 00:00, and OFF.
Use:
•
Í
,
Î
to switch between hours and minutes
•
A, P to specify AM or PM
•
u
,
t
to turn the alarm On/Off.
y
Press ENTER to save changes.
If turned on, the Daily alarm produces a signal at the set time.
y
Press any key to interrupt the Daily alarm beep (otherwise, the beep will
continue for 30 seconds).
Memory check
Instantly check the free memory status with this Setup option.
y
Enter the Memory check subsection to check the remaining free memory.
Data deletion
The Data deletion subsection gives you the ability to free up memory resources by
deleting records much faster than removing them one by one.
Set password
With no password set (default) all functions of the SDN 440T are freely accessible.
After a password has been set, the following sections may be locked against
unauthorized access: Telephones, Schedule, User’s dictionaries, PC
communication, Data deletion, Security mode, Set password. To gain access to
any of these sections in the locked mode, a valid password must be provided.
y
Enter the Set password subsection.
y
Specify a password up to 8 characters in length. Press ENTER.
y
Retype the password for confirmation. Press ENTER.
