SENCOR SDN 440T
User's Manual
16
9
If a Reminder and a Daily alarm are timed to go off for the same time, only the
Reminder will be displayed since it has higher priority.
The corresponding Schedule record will be displayed in the view mode at this time.
y
Press any key to interrupt a Schedule alarm or a Reminder beep.
You can change the record and set the Reminder for a later time. Closing the
Schedule reminder window will bring you back to the section (for example,
Dictionary) as you were before the alarm went off.
CALCULATOR
y
Press SHIFT+CALC to enter the Calculator section.
When entering numbers and operations from the keyboard, there is no need to
press the SHIFT key while in the Calculator mode. Use this application as an
ordinary pocket calculator.
METRIC CONVERSION
With the SDN 440T you may easily convert measurements from the British-
American system into the metric system commonly used in Europe and vice versa,
as well as convert within each system.
y
Enter the Metric Conversion section.
y
Choose a subsection by pressing
Ð
,
Ï
. Press ENTER.
y
Input the value.
9
There may be more than four units of measure in the subsection.
CURRENCY CONVERSION
The Currency Conversion function allows you to instantly calculate conversion
values between nine pre-installed currencies and three user-defined currencies.
y
Enter the Currency Conversion section.
Setting and Check ing Rates
y
Select the Set rate subsection to specify currency names and rates.
y
Select a currency. Press ENTER.
9
You can specify or change the names of any of the currencies listed. New
currencies may be added in place of ???.
y
Change/specify the currency name. Press ENTER to open the next window.
y
Specify an exchange rate relative to the basic currency (whose rate should
equal 1).
9
The default exchange rate for all currencies is 1.
