Sencor SDB 2012T, User Manual

Page: 30 / 50

28 EN
9 Hotkey
9.1 Standby
1. Press [Power] Key can enter the Standby state
2. In Standby state, press [Power] Key again can call back the unit and go on play the
previous channel
3. User can also disconnect the device’s main power to end the Standby state.
9.2 CH+/CH
Infull screen, press [Up/Down] to change channel.
9.3 V-/V+
In full screen, press [Left/Right] to adjust volume.
9.4 Number
In full screen, use number key and after 2 seconds it will go to the channel or press [OK]
key to change channel directly.
9.5 TV/RADIO
In TV mode, press [TV/RADIO] key can switch to Radio mode. In Radio mode, press
[TV/RADIO] key to switch to TV mode.
9.6 Channel list
1. In full screen, press [OK] key can enter “Channel List”, please refer to TV Channel List
for detail information.
2. In “Channel List” menu, press [OK] key to play the highlighted channel.
9.7 Audio
1. In full screen, press [Audio] key can open the “Audio Mode” window.