Sencor SDB 2012T, User Manual

Page: 24 / 50

22 EN
7.5 OSD Setting
When you input to “OSD Setting” menu, you will see a screen like below:
1. Subtitle Display: You can press [Left/Right] key to select “On” or “Off”. If the current
channel has subtitle information, it will be showed up while this function is “On”. If this
function is “Off”, there won’t show up subtitle information even if the current channel
has subtitle information.
2. OSD Transparency: you can set the transparency of OSD. You can press [Left/Right]
key to select the values. There are 5 levels of transparency, 10%, 20%, 30%, 40%,
50%, and “Off” (means no transparency function).
3. Load Default OSD Setting: Press OK to load default OSD setting.
4. Press [Exit] key to draw back from the “OSD Setting” menu.
7.6 Parental Lock
You can set a password for anyone who wishes to operate in the “Installation” menu. And
you can also set the password for the lock channels. (How to set the lock channel please
refer to Lock) Here will show you how to setting and how to revising the password.
1. In “Parental Lock” function, press [OK] key, there will pop a dialogue for you to input
the password. The default password is “0000”. When you input the correct password,
you will see a screen like below: