Induction Cooktop
SCP 5303GY / SCP 5304WH
EN
EN-9
06/2015
2015
1.3 If you remove the cookware from the hotplate, the display will show the error message E0 and
a sound will be made. After a while the respective hotplate will switch to the stand-by mode.
1.4 If cookware unsuitable for induction cooking is placed on the hotplate, then heating will not start
after the MENU button is pressed and the display will show the error message E0 and a sound will
be made. After a while the hotplate will switch to the stand-by mode.
2. SETTING THE POWER LEVEL
2.1 When the large/small hotplate is started, the power level is automatically set to 1600/1300 W.
If the power level display indicator is lit on the control panel A or B, use the
or button to set
the required power level in the range 200 to 1600/1300 W (large/small hotplate).
2.2 If a different indicator is lit on the control panel, fi rst use the MENU button to switch to the power
level display mode and then use the
or button to set the power level.
3. SETTING THE TEMPERATURE
Using the Menu button switch the display to the temperature display mode. The temperature
display mode indicator will be lit on the control panel A or B. When the induction cooktop is
started, the temperature is automatically set to 240 °C. Using the
or button, select the desired
temperature in the range 60–240 °C.
4. SETTING A COMBINATION OF A POWER LEVEL AND THE AUTOMATIC SHUT OFF TIMER
4.1 Press the MENU button repeatedly until the power level display mode and the automatic shut off
timer are shown at the same time. "0:00" will appear on the display. Using the
or button, set
the automatic shut off time in the range 1 minute to 3 hours. Press the
or button to increase
or decrease the automatic shut off time by 1 minute. To change the set time faster, hold down the
or button.
4.2 The set time will fl ash on the display for 5 seconds and then the display will switch to the power
level display mode. The power level is preset to 1600/1300 W (large/small hotplate). You can change
the set power level using the
or button.
Until
the automatic shut off of the hotplate, the
remaining time until automatic shut off and the set power level will alternate on the display.
While the time is counting down, the set power level can be changed using the
or button as
necessary.
4.3 At the end of the set automatic shut off time a sound is made and the respective hotplate turns
itself off. "OFF" (turned off) is shown on the display indicating that the hotplate is in the stand-by
mode.
5. SETTING A COMBINATION OF A TEMPERATURE AND THE AUTOMATIC SHUT OFF TIMER
5.1 Press the MENU button repeatedly until the temperature display mode and the automatic shut off
timer are shown at the same time. "0:00" will appear on the display. Using the
or button, set
the automatic shut off time in the range 1 minute to 3 hours. Press the
or button to increase
or decrease the automatic shut off time by 1 minute. To change the set time faster, hold down the
or button.
5.2 The set time will fl ash on the display for 5 seconds and then the display will switch to the
temperature display mode. The temperature is preset to 240 °C. The temperature setting can be
changed using the
or button. Until the automatic shut off of the hotplate, the remaining time
until automatic shut off and the set temperature will alternate on the display. While the time is
counting down, the set temperature can be changed using the
or button as necessary.
5.3 At the end of the set automatic shut off time a sound is made and the respective hotplate turns
itself off. "OFF" (turned off) is shown on the display indicating that the hotplate is in the stand-by
mode.
6. TURNING OFF THE HOTPLATE
When you have fi nished using it, turn off the hotplate by pressing the
button. "OFF" (turned
off) will be shown on the display and the hotplate will be in stand-by mode. If both hotplates are
turned off then disconnect the induction cooktop from the power socket.
