Sencor SAC 0911CH, User Manual

Page: 8 / 172

EN-8
EN
Wall Mounted Split Air Conditioner
SAC 0911CH / SAC 1211CH
02/2014 Copyright © 2014, Fast ČR, a.s.
C
1
Signal transmitter
Sends signals to the indoor unit.
2
Display
Shows the current settings.
3
Temperature setting buttons
Press once to increase the temperature setting by 1 °C. Press once to decrease the
temperature setting by 1 °C. The temperature temperature settings range is 16-31 °C.
4
I/O button
Press this button to turn on/off the air conditioning device.
5
FAN SPEED button
Press this button to change the fan speed in the following sequence:
low–medium–high–automatic (
).
6
SLEEP button
Press this button to set the SLEEP mode.
7
SWING button
Press this button to change the vertical air fl ow direction (up/down).
In this mode the plate will automatically move up and down.
8
MANUAL button
Press this button to change the vertical air fl ow direction (up and down) and the plate will be
tilted at a certain angle. You can gradually set the plate to the following positions:
.
9
OPERATION MODE button
Press this button to select an operating mode: (automatic), COOL (cooling),
HEAT (heating – only for models with a heat pump), FAN (ventilation), DRY (drying).
0
TIMER button
See chapter "Automatic Timer Controlled On/Off Operation".
qa
CANCEL button
See chapter "Automatic Timer Controlled On/Off Operation".
qs
TURBO button
Press this button to start the TURBO mode. Press this button again to turn off the TURBO
mode.
qd
DISPLAY button
Press this button to turn off the display on the indoor unit of the air conditioner.
Press this button again to turn on the display.
qf
Battery compartment
Open battery compartment cover. Place two AAA/LR03 (2 x 1.5V) alkaline batteries into the
battery compartment and close the cover.
Note :
For proper operation the distance from the remote control to the indoor unit must not be
greater than 6m and there must not be any obstacles in the direction of the signal.
To make description and explanation easier we have displayed all the symbols on the image of
the remote control.