Senco SNS50, Instruction Manual

Page: 4 / 44

SPECifiCATiONS
Model SNS50 SQS55
Article No. EJ02000 EJ01900
Weight
10.5 kg
Dimensions (L x W x H) 310 mm x 340 mm x 430 mm
Type of trigger Automatic
Trigger sequence
Depending on distance
Trigger safety mechanism yes, in roller
Driving energy Compressed air
Compressed air connection 3/8” NPT
Permissible max. operational pressure
8.3 bar
Recommended operational pressure 6.0…7.0 bar
Air consumption per operation process 3.1 l at 6 bar
Permissible operational items
Staple type N, LN (32…63 mm) Q, LQ (38.... 63 mm)
Magazine capacity [unit]
130 160
Noise levels:
According to Doc. No. CEN/TC 255 WG1
N 45.3
L
WA, 1s, d
99 dB
L
PA, 1s, d
93 dB
Vibration levels:
According to iSO 8662-11/e
2.4 m/s
2
Recommended lubricant If there is no maintenance unit, oil the air
inlet on the stapler with SENCO pneuma-
tic oil; under normal operational conditions
5-10 drops, twice daily, are enough.
Delivery contents Stapler, limit stop and clamping arm for
guide rails,
2 guide rollers (replacement), Allen key 4
mm, instruction manual
4
GENERAL
Please read this instruction manual carefully and in its entirety before initial operation of the stapler. Pay particular attention
to the safety instructions in chapter 2.
This instruction manual must always be on hand for every user.
1.1 RANGE Of APPLiCATiON
The SNS50/SQS55 Wegmatik stapler drives staples into panel-shaped building materials such as chipboard, gypsum fibre-
boards, OSB boards etc. for assembly on wooden frames (intended use)
1.2 TECHNiCAL DATA
For your own safety, use only the staples listed in the technical data.