8
9
EN
MAINTENANCE
Warning
y
Repairs other than those described here should be
performed only by trained, qualified personnel. Contact
SENCO for information at:
+31 320 295 575.
y
Read section titled “Safety Warnings” before maintaining
tool.
y
Only use spare parts specified by manufacturer or
authorized representative.
y
All screws should be kept tight. Loose screws result in
unsafe operation and parts breakage.
y
Check monthly
y
With tool disconnected, make daily inspection to assure
free movement of workpiece contact and trigger. Do not
use tool if workpiece contact or trigger sticks or binds.
y
Squirt Senco pneumatic oil (5 to 10 drops) into the air
inlet twice daily (depending on frequency of tool use).
Other oils may damage O-rings and other tool parts.
y
Some Senco tools are Oil Free and DO NOT require oil,
Check label.
y
Wipe tool clean daily and inspect for wear. Use non-
flammable cleaning solutions only if necessary.
y
Do Not Soak.
y
Caution: Such solutions may damage O–rings and other
tool parts.
y
Dispose of cleaning materials properly.
1
SYMPTOM
Air leak near top of tool. / Sluggish operation
SOLUTION
Verify air supply / tighten screws or install Repair
Kit – See Parts Manual
2
SYMPTOM
Air leak near bottom of tool / Poor return.
SOLUTION
Clean tool / tighten screws or install Repair Kit
See Parts Manual
3
SYMPTOM
Other problems.
SOLUTION
Contact SENCO.
4
SYMPTOM
No illumination on Display.
SOLUTION
Check Battery Level, charge if required.
Should Staple Jam Occur:
Disconnect Air Supply
Remove Fasteners
Clear the Jam
Follow loading Procedure
TROUBLE SHOOTING
TECHNICAL DATA
NAIL RANGE
Tool Type
Minimum to maximum
operating pressure
Air Consumption (60
cycles per minute) litre
Air Inlet
Maximum Speed
(cycles per second)
W
eight Kg
Nail Capacity
Tool size: Height mm
Tool size: Length mm
Tool size: Width:
Main Body mm
XtremePro Series
SBM SCN49XP
6-8,3 bar
111
3/8 in NPT
3
10.2
375
337 - 1173
337-1283
314
SBM SCN65XP
6-8,3 bar
270
3/8 in NPT
8
11.4
275
337 - 1173
337-1283
327
Tool Type
Min-max length mm
Min-Max diameter mm
Smooth
Ring
Screw
Collation Type
Collation Angle
XtremePro Series
SBM SCN49XP
2.1-2.9
32-65
32-60
50-65
Wire & Plastic
16°
SBM SCN65XP
2.5-3.3
50-90
50-70
50-83
Wire
16°
Summary of Contents for SCN49XP
Page 102: ...102 RU y y y y y y y y y y y y y y 102 102 102 103 105 109 109 109 110 110 120 124...
Page 103: ...103 RU y y y y CE EN166 y y y y y y y y y y y y y y y y y y y y y y y y y y y y y y y y...
Page 105: ...105 RU y y 1 5 106 1 1 y 8 3 y y 19 8 y y 1 1 1 SENCO 5 10 1 1 2 1 8 3 2 6 3 4 1 2 A1 A2 A3...
