3-23
3-3-3 MAC based Access Control
1. Click
Basic Config,
select
MAC Filter
page
,
and choice the MAC Filter
services is
Enable
or
Disable
. (as shown in
Figure 3-20
)
2. You can specify the MAC address of a wireless client station. All MAC
entries in the MAC address table are permitted to connect to the RB.
You can also click
ADD, DELETE, MODIFY
button to maintain this MAC
address table. After that, click
FINISH
at the bottom of this page to
complete the modification of this page.
Figure 3-20
3-24
3-4 Configure DHCP server
Sometimes, the operator want to managing a large TCP/IP network requires
maintaining accurate and up-to-date IP address and domain name
information. In this situation, it needs manually configure and enable the
DHCP server service
1. Click
Basic Config,
select
DHCP
(as shown in
Figure 3-12
)
and
Enable
the DHCP server service (Default is
Disable
).
2. Specify the DHCP server parameters (
Assign Gateway, Assign
Subnet Mask, Assign DNS server, DHCP Start IP address, DHCP
End IP address
and
Apply Interface
) to allow any DHCP client to
acquire the IP information.
Assign Gateway
: Configure the default router for the client.
Assign Subnet Mask
: Configure the subnet for the client.
Assign DNS Server
: Configure the DNS servers IP for the client.
DHCP Start IP address, DHCP End IP address
: Configure the DHCP
IP address pool for the client.
Apply Interface
: Enable DHCP server service on Wireless or Ethernet
interface.
3. After that, click
FINISH
at the bottom of this page to complete the
modification of this page.
Hint:
The operator must to configure correct network settings in Gateway
and DNS server of your wireless stations/Extension RBs/Ethernet clients to
surf the Internet.