~9~
- Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate this
equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
IMPORTANT NOTE:
Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. End users must follow the specific operating
instructions for satisfying RF exposure compliance. To maintain compliance
with FCC RF exposure compliance requirements, please follow operation
instruction as documented in this manual.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
Industry Canada statement:
This device complies with RSS-210 of the Industry Canada Rules. Operation is
subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
IMPORTANT NOTE:
Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an
uncontrolled environment. End users must follow the specific operating
instructions for satisfying RF exposure compliance. To maintain compliance
with IC RF exposure compliance requirements, please follow operation
instruction as documented in this manual.
This device has been designed to operate with an antenna having a maximum
gain of 1.5 dBi. Antenna having a higher gain is strictly prohibited per
regulations of Industry Canada. The required antenna impedance is 50 ohms.
~10~
Equipment Checklist
1. In a Base + Handset package, please find the following components:
a. Base Station x 1 (antenna installed)
b.
Base AC/DC Adaptor x 1
c.
Handset x 1 (antenna installed)
d.
Desktop Charger x 1
e.
Charger AC/DC Adaptor x 1
f.
1100mA Li-ion Battery Pack x 1
g.
Telephone Cord x 1
h.
CD (User’s Manual), Quick Guide
i.
Belt clip x 1
2.
In a Handset package, please find the following components:
a.
Handset x 1 (antenna installed)
b.
1100mA Li-ion Battery Pack x 1
c.
Desktop Charger x 1
d.
Charger AC/DC Adaptor x 1
e.
Quick Guide
f.
Belt clip x 1
3.
Optional Accessories
a. Outdoor External Antenna Kit for Base Station (including antenna and
cable)
b.
Indoor External Antenna Kit for Base Station (including antenna and
cable)
c.
Lightning Protection Kit
d
.
High-gain handset antenna (Long antenna)
e.
Headset
f.
Antenna Splitter
