7
Connecting the Microphone
▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪
Connecting the Microphone
Use an XLR cable (not included) to connect the microphone to your mixing console, microphone
preamp, or recording device� Make sure phantom power is turned on�
Note:
Phantom power must be used with this microphone� Make sure your recording device has proper
+48 V phantom power�
Warning
Make sure all faders and volume knobs are turned down� After the microphone is connected, set the
volume to your preferred level for recording�
Before recording, make sure the high-pass filter is set to OFF (
), and the attenuation pad is not
engaged� See
High-Pass Filter
on page 6 for more information�
If using this microphone for vocals, do not sing or blow directly into the diaphragm� Use a pop filter
(not included) to eliminate vocal plosives and shield against corrosive moisture that can damage the
diaphragm�
Summary of Contents for SCM-600
Page 12: ...GG1 ...
