When you are using a smartphone, sometimes you may need to selectively use the Tufttalk for A2DP stereo music only or for
mobile phone handsfree only. These instructions are for advanced users who want to pair the Tufttalk to their smartphones
with only one selective profile: A2DP for stereo music of HFP for phone calls.
If you have previously paired a mobile phone to the Tufttalk, you must clear the previous pairing list on both devices: the
mobile phone and the Tufttalk. To clear the pairing list on the Tufttalk, please do a factory reset or following the pairing list
clearing procedure described in section 19.4, “Factory Reset” or 16.9, “Delete All Bluetooth Pairing Information”. To clear the
pairing list on the mobile phone, please refer to the mobile phone manual. For most smartphones, delete the Sena Tufttalk
from the list of Bluetooth devices in the settings menu.
5.3.1 A2DP Stereo Music Only
1. Turn on the headset and press the Phone Button for 5 seconds until the LED flashes red and blue alternately and you hear
multiple beeps.
2. Within 2 seconds, tap the Jog Dial again, then the LED flashes red and you hear “
Media selective pairing
”.
3. Search for Bluetooth devices on your smartphone. Select the Sena Tufttalk in the list of devices detected on your phone.
4. Enter 0000 for the PIN. Some mobile phones may not ask for PIN.
5.3.2 HFP for Phone Call Only
1. Turn on the headset and press the Phone Button for 5 seconds until the LED flashes red and blue alternately and you hear
multiple beeps.
2. Within 2 seconds, tap the Phone Button again, then the LED flashes blue and you hear “
Phone selective pairing
”.
3. Search for Bluetooth devices on your smartphone. Select the Sena Tufttalk in the list of devices detected on your phone.
4. Enter 0000 for the PIN. Some mobile phones may not ask for PIN.
5.4 Intercom Pairing
5.4.1 Pairing with Other Tufttalk Headsets for Intercom Conversation
The Tufttalk can be paired with up to three other headsets for Bluetooth intercom conversation.
1. Turn on the two Tufttalk headsets (A and B) that you would like to pair with each other.
2. Press and hold the Jog Dial of the headset A and B for 5 seconds until red LEDs of the both units start to flash rapidly. You
will hear a voice prompt, “
Intercom pairing
”.
3. Tap the Jog Dial on any one of the two headsets A and B, and wait unit the LEDs of both headsets turn to blue and
intercom connection is automatically established. The two Tufttalk headsets A and B are paired with each other for intercom
conversation. If the pairing process is not completed within one minute, the Tufttalk will return to stand-by mode.
4. You can make other pairing between headsets A and C, and between headsets A and D by following the same procedure
as above.
5. The intercom pairing queue is ‘
Last-Come, First-Served
’. If a headset has multiple paired headsets for intercom
conversations, the last paired headset is set as
first intercom friend
. The previous intercom friend becomes
second
intercom friend,
and
third intercom friend.
Note:
For example, after the pairing procedures listed above, headset D is the
first intercom friend
of headset A. Headset C is the
second intercom friend
of headset A, and headset B is the
third intercom friend
of headset A.
