16 CONFIGURATION SETTING
You can set the configuration of the Tufttalk by the voice menu instruction described below.
1. To enter into voice configuration menu, press and hold the Jog Dial for 12 seconds until the LED shows solid blue and you
hear high toned double beeps. You will also hear a voice prompt, “
Configuration menu
”.
2. Rotate the Jog Dial to navigate between the menus. You will hear voice prompts for each menu item as below.
3. You can enable the feature or execute the command by tapping the Phone Button, or disable the feature by tapping the
Jog Dial.
4. If no button is pressed within 10 seconds, the Tufttalk will exit the configuration and go back to stand-by mode.
5. If you want to exit the configuration immediately, Rotate the Jog Dial until you hear a voice prompt, “
Exit configuration
”,
and tap the Phone Button.
The voice prompt for each menu item is as below
(1) Speed dial
(2) Audio Boost
(3) VOX phone
(4) VOX intercom
(5) Voice prompt
(6) RDS AF Set
(7) Sidetone
(8) Noise control
(9) Delete all pairings
(10) Exit configuration
16.1 Assigning Speed Dial
Voice Prompt
"
Speed dial
"
Factory Default
N/A
Execute
Tap the Phone Button
1. To assign a phone number as a speed dial, rotate the Jog Dial until you hear a voice prompt, “
Speed dial
”.
2. Tap the Phone Button, and you will hear a voice prompt, “
Speed dial one
” and “
Phone connected
”.
3. Rotate the Jog Dial to select one of three speed dial numbers and you hear a voice prompt, “
Speed dial (#)
”.
4. Call a phone number you want to assign and you will hear a voice prompt, “
Save speed dial (#)
”. The phone number is
automatically assigned to the selected speed dial number. Then the phone call will hang up before being connected.
5. To exit the menu, rotate the Jog Dial until you hear a voice prompt, “
Cancel
”, and tap the Phone Button to confirm. You will
then hear a voice prompt, “
Cancel
”. If no button is pressed within 1 minute, the Tufttalk will exit the configuration menu and
go back to stand-by mode.
