English
SPH10H-FM
41
6. To stop scan function, double tap the Phone Button.
21.5 Temporary Preset
With the temporary preset function, you may
temporarily preset stations automatically without
changing the existing preset stations. Tap the Phone
Button three times which will automatically scan for
10 temporary preset stations. The temporary preset
stations will be cleared when the system is powered
off.
21.6 Region Selection
You can select proper FM frequency region from
Sena device manager. With the region setting, you
may optimize seek function to avoid unnecessary
frequency range (Factory default: worldwide).
Region
Frequency Range
Step
Worldwide
76.0 ~ 108.0 MHz
± 100 kHz
Americas
87.5 ~ 107.9 MHz
± 200 kHz
Asia
87.5 ~ 108.0 MHz
± 100 kHz
Australia
87.5 ~ 107.9 MHz
± 200 kHz
Europe
87.5 ~ 108.0 MHz
± 100 kHz
Japan
76.0 ~ 95.0 MHz
± 100 kHz
22. RESET TO FACTORY DEFAULT
SETTINGS
1.
To restore the SPH10H-FM to factory default
settings, press and hold the Phone Button for 12
seconds until the LED shows solid red and you
hear double beeps. You will hear a voice prompt
saying
“Factory reset”
.
2. Within 5 seconds, press the Jog Dial to confirm
reset. The headset will be restored to factory
setting and switched off automatically. You will
hear a voice prompt saying
“Headset reset,
good-bye”
.
3. If you don’t press the Jog Dial within 5 seconds,
the reset attempt is canceled and the headset
returns to stand-by mode. You will hear a voice
prompt saying,
“Canceled”
.
