English
SPH10H-FM
19
9. SPH10H-FM CONFIGURATION
SETTING
You can set the configuration of the SPH10H-FM by the
voice menu instruction as below.
1. To enter into voice configuration menu, press and
hold the Jog Dial for 12 seconds until the LED shows
solid blue and you hear high tone double beeps. You
will also hear a voice prompt saying
“Configuration
menu”
.
2. Rotate the Jog Dial clockwise or counter-clockwise
to navigate between the menus. You will hear voice
prompts for each menu items as below.
3. You can enable the feature or execute the command
by tapping the Phone Button, or disable the feature by
tapping the Jog Dial.
4. If any button is not pressed within 10 seconds, the
SPH10H-FM will exit the configuration and goes back
to stand-by.
5. If you want to exit the configuration immediately, rotate
the Jog Dial until you hear a voice prompt,
“Exit
configuration”
, and tap the Phone Button.
The voice prompt for each menu item is as below:
(1) Speed dial (6) Sidetone
(2)
VOX phone
(7)
Noise control
(3)
VOX intercom
(8)
Delete all pairings
(4) Voice prompt (9) Exit configuration
(5) RDS AF setting
Exit configuration
VOX phone
VOX intercom
Delete all pairings
Voice prompt
RDS AF setting
Sidetone
Noise control
Speed dial
9.1 Assigning Speed Dial
Voice Prompt
“Speed dial”
Factory Default
N/A
Execute
Tap the Phone Button
1. To assign a phone number as a speed dial, rotate
the Jog Dial until you hear a voice prompt saying
“
Speed dial
”.
