
Note. Turn off the camera and connect it to your PC via a USB cable. Your PC should recognize
the camera as a removable device.
6. CONFIGURATION SETTINGS
the camera configuration menu, you can change the
settings of the Prism Tube WiFi through the the Sena Camera App.
7. TROUBLESHOOTING
7.1. Fault Reset
If the Prism Tube is not working properly for any reason, push the pin-hole reset button
located on the back of the camera while it is turned on.
7.2. Factory Reset
To factory reset , turn on the camera and press and hold the SD Card Format Button for
5 seconds until the red LED flash.