background image

 

SMH3

 

 

17 

 

 

2.

  To terminate an intercom conversation, press the (-) Button for 1 second again.  

 

[picture 11-2] 

 

9.4 Intercom and Mobile Phone Call 

 

  

1.  When you have an incoming mobile phone call during an intercom conversation, you will hear a ring tone. You can 

choose whether to 

1) answer the mobile phone call and stop the intercom conversation

, or 

2) reject the phone call and 

stay on the intercom conversation

  To answer the phone call and stop the intercom conversation, tap the (+) Button. When you hang up the phone 

call, the intercom will automatically be recovered. 

  To reject the phone call and stay on the intercom conversation, press the (+) Button for 2 seconds until you hear a 

beep.  

Unlike other motorcycle Bluetooth headsets, this prevents a user from being dropped out of an intercom conversation 

by an incoming mobile call. 

2.  When you have an incoming intercom call during a mobile phone call, you will hear 4 high tone beeps, alerting you 

that there is an incoming intercom call. You will also hear a voice prompt saying 

“Intercom requested”

. In this case, 

the intercom call does not override the mobile phone call because intercom has lower priority than mobile call. You 

have to hang up the mobile phone call to make or receive an intercom call. 

 

9.5 Intercom Failure 

 

  

  

  

 

 

 
When you try to start an intercom conversation with an intercom friend who is already having a mobile phone call with 

another person, you will hear a low tone double beep signifying a busy signal. You will also hear a voice prompt saying 

“Intercom failed, try again later”

. In this case, you have to try again later. On the other hand, the intercom friend will 

hear 4 high tone beeps alerting them that there is an incoming intercom call.  

 

9.6 Intercom Reconnection 

 
If your intercom friend goes out of range while having an intercom conversation, you may hear static noise and eventually 

the intercom will be disconnected. In this case, the SMH3 automatically tries to reconnect the intercom every 8 seconds. 

You will hear high tone double beeps until the intercom is reestablished. If you don’t want to make a reconnection, tap the 

(-) Button to stop the attempt.  

 

9.7 Stereo Music 

 
You can listen to stereo music by Bluetooth wireless stereo. The Bluetooth audio device must be paired with the SMH3 by 

following the 

Bluetooth Stereo Device Pairing

 instructions described in the previous chapter. The SMH3 supports the 

Audio/Video Remote Control Profile (AVRCP), so if your Bluetooth audio device also supports the AVRCP, you can use 

Summary of Contents for SMH3






















Reviews: