background image

 

SMH3

 

 

16 

 

9. USING THE SMH3 

 
 

9.1 Volume Adjustment 

 
You can easily adjust the volume by tapping the (+) Button or the (-) Button. You will hear a beep when the volume 

reaches maximum or minimum level. The volume is set and maintained independently at different levels for each audio 

source even when you turn off and on the headset. For example, once you set the volume for mobile phone handsfree, it 

will not change even if you adjust the volume when you hear Bluetooth MP3 music. So you can always maintain the 

preferred optimum volume level for each audio source. 

 

9.2 Mobile Phone Call Making and Answering 

 

1.  When you have an incoming call, simply tap the (+) Button to answer the call.  

2.  You can also answer the incoming call by loudly speaking any word of your choice if 

Voice Activated Phone 

Answering, VOX phone 

is enabled. (Refer to the next section for details.) 

3.  To end a call, press the (+) Button for 2 seconds until you hear a mid-tone single beep, or wait for the called person 

to end the call.  

4.  To reject a call, press the (+) Button for 2 seconds until you hear a beep while the phone is ringing.  

5.  There are several ways to make a phone call: 

- Enter numbers on your mobile phone keypad and make a call. Then the call is automatically transferred to the headset.  

- Press the (+) Button for 3 seconds in stand-by mode until you hear a high tone single beep to activate the voice dialing 

of your mobile phone. For this, the voice dialing feature must be available on the mobile phone. Refer to your mobile 

phone manual for further instruction. 

- To redial the last number, press the (-) Button for 3 seconds in stand-by mode until you hear a high tone single beep. 

You will hear a voice prompt saying 

“Last number redial”

 
Note:  

1. If you are using multipoint mobile phone connection and you have an incoming call from the second phone during the 

call of the first phone, then you may still receive the call from second phone. In this case, the call from the first phone is 

on waiting mode. If you end a call, then it will automatically guide you to the first phone call. 

2. If you are using multipoint connection of mobile phone and GPS, you may not listen to the GPS voice instruction during 

the phone call. 

 

9.3 Intercom Conversation 

 

1.

  You can start an intercom conversation with any of intercom friends by pressing the (-) Button for 1 second. 

 

[picture 11-1] 

Summary of Contents for SMH3






















Reviews: