1. Execute
Phone Selective Pairing
in the
Configuration Menu
.
2. With your hands-free device in Bluetooth-pairing mode, select Sena Momentum in the list of devices detected.
3. If it asks for a PIN, enter 0000.
2.3.2 Media Selective Pairing – A2DP Profile
1. Execute
Media Selective Pairing
in the
Configuration Menu
.
2. With your A2DP device in Bluetooth-pairing mode, select Sena Momentum in the list of devices detected.
3. If it asks for a PIN, enter 0000.
3. MOBILE PHONE USAGE
3.1 Making and Answering Calls
Note:
If you have a GPS device connected, you will not hear its voice navigations during a phone call.
3.2 Speed Dialing
3.2.1 Assigning Speed Dial Presets
1. Execute
Speed Dial
in the
Configuration Menu
by holding down the
Center Button
for
10 seconds
, then
using the
(+) and (-) Buttons
to scroll through the menu. Please refer to
Section 2.7: “Configuration Menu”
for
more details.
2. Tap the
(+) Button
or the
(-) Button
to set up the three available
Speed Dial Presets
. You will hear the voice
prompt, “
Speed dial
” followed by the preset number.
3. On your mobile phone, call the number to which you want to assign a
Speed Dial Preset
. The call will be
terminated immediately. Then, you will hear the voice prompt, “
Save speed dial (#)
.” This confirms that the
number was saved.
4. Use this procedure to save other
Speed Dial Presets.
5. To exit the menu, tap the
(+) Button
or the
(-) Button
until you hear the voice prompt, “
Cancel
,” then tap the
Center Button
to confirm.
3.2.2 Using Speed Dial Presets
1. Press and hold the
(+) Button
for
3 seconds
to enter into the
Speed Dial
menu. You will hear the voice
prompt, “
Speed dial
.”
2. Tap the
(+) Button
or the
(-) Button
to navigate between the
Speed Dial Presets.
3. To redial the last number called, tap the
Center Button
when you hear the prompt, “
Last number redial
.”
4. To call one of your
Speed Dial Presets
, tap the
Center Button
when you hear the prompt, “
Speed dial (#).
”
