18
2) Connect the other end of the cable to the serial port of user’s computer.
3) Run a terminal emulator program such as HyperTerminal. Set up the serial configuration
parameters of the terminal emulation program as follows:
9600 Baud rate, Data bits 8, Parity None, Stop bits 1, Hardware flow control (RTS/CTS)
4) Press [ENTER] key.
5) Type the user name and password to log into the HelloDevice Pro Series. A factory default
setting of the user name and password are both
admin
.
login : admin
Password : *****
6) If the user logged into the HelloDevice Pro Series successfully, the main menu screen will
appear on the computer.
From the main menu screen, shown below in Figure 2-8, users can select the menu item for the
configuration of the HelloDevice Pro Series parameters by typing the menu number and pressing
[ENTER] key. In the submenu screen, users can configure the required parameters guided by online
comments. All the parameters are stored into the non-volatile memory space of the HelloDevice Pro
Series, and it will not be stored until users select menu
7.Save changes
. When users are finished
with the configuration, the system needs to be rebooted by selecting the menu
9.Exit and reboot
.
All the configuration changes will be effective after the reboot.
-------------------------------------------------------------------------------
Welcome to PS-400 configuration page
Current time
: 2002/05/04 14:13:25
Serial No. : PS200-020200028 MAC Address
: 00-01-95-04-13-80
F/W REV. : V1.2.12 UP time : 0 Days 02:26:00
IP mode : DHCP
IP Address : 192.168.0.152
-------------------------------------------------------------------------------
Console#1 (Serial) : Connected
Console#2 (Telnet) : Available (NULL)
Console#3 (Telnet) : Available (NULL)
Console#4 (Telnet) : Available (NULL)
-------------------------------------------------------------------------------
Select menu
1. IP Configuration
2. Serial port configuration
3. System Status & log
4. System administration
5. Advanced options
6. System tools
7. Save changes
8. Exit without reboot
9. Exit and reboot
<ESC> Back, <ENTER> Refresh
----->
Figure 2-8. The main menu screen (PS400)
