© Semtech 2006
www.semtech.com
14
User Guide
XE8000 ProStart II
4.8
XELOADER COMMAND LINE
If the command line version fits your application better, you can still use it this way. Simply add the following option at
the end of the command line : “-c”, the GUI will still display but there is no need to interact with it.
The “-c” option makes the command line program act the same way as previous versions.
C:\>XELoader -c
Usage: XELoader prostart_type comport [-h] | [-i] | [-t target_name] | [-u input_file] | [-s
voltage] | [-g] | [-r state]
Interfaces the XE8000 familly ProStart kits
-h : Display this information.
prostart_type : Specifies the ProStart type
1 for ProStartI
2 for ProStartII
com_port : Specifies the com port (COM1, COM2, ...)
-t target_name : Specifies the target chip to upload
-i : Display information about XELoader and connected
ProStartKit.
-u input_file : Uploads input_file to the XE8000 microcontroller
Input file formats : *.axe, *.bin, *.rom
-s voltage : Sets the given voltage on the ProStart
Voltage : 2.4, 3.0, 5.0
-g : Reads the XE8000 microcontroller Checksum
(only for ProStartII)
-r state : Enables or disables the PortB pins 6 and 7
connection to the RS232 line driver.
state : ON, OFF (only for ProStartI)
*** XELoader Version V 3.2 Release date Apr 11 2005 ***
Copyright (c) 1997-2004, SEMTECH SA, Monruz 2, CH-2000 Neuchatel, Switzerland
