Revision 1.0 STD – February 2010
Page 24 of 31
www.semtech.com
© Semtech 2011
SX1233SKA
USER GUIDE
Packet Log Parameter
Description
Time
Local (CPU) timestamp in MM:SS.S format for TX / RX packets
Mode
SX1233 Packet Mode
RSSI
Indicated RSSI level (RX mode only)
Pkt Max
Number of repeated packets set in GUI Control Window (0 = infinite)
Pkt #
Transmitted or received packet number
Preamble Size
Size of transmitted or received preamble sequence
Sync Sync
Address
Length
Payload length of TX / RX packet
Node Address
node Address (optional)
Message
Transmitted / received packet (can be viewed in GUI Message Window)
CRC
Transmitted / received CRC (optional)
Table 3: Packet Log Descriptors
5.5.4 Packet Handler GUI Limitations
When operating the packet handler via the SKA GUI, the user should be aware of the following limitations
associated with the GUI:
•
Minimum Preamble Size = 2 bytes
•
Maximum Packet Length = 66 bytes (64 bytes of data + Length byte + Address byte)
5.6 Temperature Configuration Register Tab
The Temperature Configuration Register Tab is illustrated below in Figure 29
Enter ambient
temperature here
Figure 28: Temperature Calibration Dialog Box
When the temperature sensor has been calibrate the temperature, as computed by the SX1233, will be
displayed, as illustrated in
