41
Reset weather station
If obviously incorrect values are being displayed, you should reset the weather station to its fac-
tory settings.
1.
Remove the batteries from the weather station and reinsert them.
When the batteries are inserted in the base station, all indications will briefly been shown in
the display. The display will also briefly illuminate and sound a beep tone.
After approx. 20 seconds, the display begins to flash and the data from the radio sensors is
queried.
2.
Pay attention to the displayed values.
3.
If incorrect values continue to be displayed: Remove the batteries from the radio sensors
used and reinsert them.
4.
Proceed as described from page 13 .
In order to accelerate the data interchange between the weather station and radio
sensor, you can keep
CHANNEL
pressed on the weather station until the display
flashes and press the
TX
button on the appropriate radio sensor. With this, the weath-
er data will be directly transmitted to the base station.
Summary of Contents for GT-WS-08s
Page 26: ...26 Displays Base station 1 2 3 4 5 6 6 5 1 2 3 4...
Page 48: ...48...
Page 51: ......
Page 52: ......
