40
When the symbol for the battery change is displayed, the inserted batteries in the base station
(symbol next to
IN
)/radio sensor (symbol next to
OUT
) need to be replaced with new ones.
Then, proceed as described from page 13 .
Please note:
The battery replacement display for the radio sensors (symbol next to
OUT
) indicates the
battery replacement for the respective displayed channel number.
With a battery change, the settings are all lost. After the battery change, proceed as
described from page 13 .
Always replace all of the batteries and only use those specified in the "Technical data".
Pay attention to the correct polarity (+/-) of the batteries when inserting them.
Dispose of old batteries in an environmentally compatible manner, see page 47.
Change degree of measurement for temperature
The temperature can only be displayed in either °C or in °F on the base sensor and radio sensor.
Base unit
Keep the
MIN/MAX
button pressed for approx. 2 seconds, in order to change the displayed
unit of measurement.
Radio sensor
1.
Open the battery panel on the back.
2.
Press the
C/F
button 1x.
Summary of Contents for GT-WS-08s
Page 26: ...26 Displays Base station 1 2 3 4 5 6 6 5 1 2 3 4...
Page 48: ...48...
Page 51: ......
Page 52: ......
