AFTER SALES SUPPORT
GB
IRE
00800-98887000
Installing/setting up the clock
GB IRE
14
3. Check whether the delivery is complete (see
fig. A
).
4. Check whether the clock exhibits any damages.
5. If the delivery is incomplete or if the clock exhibits
damage, do not use it; instead contact the manufac-
turer at the service address provided on the warran-
ty card.
Installing/setting up the clock
You can choose from various possibilities for positioning
the clock:
• Mounting the clock with the suction cups
3
(see
fig. A
),
• Mounting the clock with the hanging loop
2
,
• Setting up the clock on the support foot
4
.
Mounting the clock with the suction cups
Observe the following notes when mounting the clock
with the suction cups
3
(see
fig. A
):
• Make sure that the base which you set the clock
up on is free of dust and grease. If necessary, use a
cleaner to clean the surface in advance.
• Set up your clock in a location where it cannot be
damaged.
If the clock comes loose on its own and
falls down, please keep in mind that broken glass
is not covered by warranty!
• Avoid fixing one of the suction cups directly over a
tile joint as it will not be possible to create a vacuum
here and the suction cup will not hold (
see fig. E
).
