AFTER SALES SUPPORT
GB
IRE
00800-98887000
Start-up
GB IRE
20
Digital clock
1. Insert the battery
5
as described in the chapter
“Changing the battery” (see
fig. A
).
2. After you have inserted the battery, LCD mode will
appear and the clock will start looking for radio
signals; this is indicated by the blinking radio tower
symbol
18
(see
fig. F and G
).
Attention: No other settings can be performed dur-
ing this time. This process may take approx. 2 – 5
minutes.
3. Once a radio signal is received, the date and time will
be set automatically. The radio tower symbol
18
is
permanently visible (see
fig. F and G
).
4. If it is not possible to receive the radio signal, the ra-
dio tower symbol will not be shown.
If you fail to receive a signal, observe the notes at the
beginning of this chapter.
− As there are fewer atmospheric disturbances at
night, the radio-controlled clock will in most cases
receive a radio signal then. Generally speaking, syn-
chronising the clock once a day is enough to keep
the exact time.
To start searching for a radio signal again, proceed as
follows:
1. Press the “FUNK” (RADIO SIGNAL) button
11
(see
fig. B
).
2. Press the “NEUSTART” (RESTART)
9
button.
If that doesn’t work, remove the battery, wait approx. 30
seconds and then insert it again.