Semitron VoiceMusic, User Manual

Page: 11 / 24

9
• 4.4 CAN BUS
General
The device also cooperates with the elevator control panels of
SEMITRON that have four-wiring CAN BUS. In this case the de-
vice receives the information for the floor announcement
through the CAN BUS signals so no other connections to the el-
evator control panel are required.
Connections
Settings
When the terminal resistance must be activated on this device
(due to the topology of the CAN BUS connections), this can be
done simply by switching the terminal resistance (TERM) to ON
position. In order to set up the device to receive information
about the floor announcement from CAN BUS it is required to
make the settings shown below.
G
O
N
G
T
Y
P
E
_0
T
Y
P
E
_1
GONG TYPE_1 TYPE_0
CAN_BUS OFF ON ΟΝ
T
E
R
M
C
A
N
H
C
A
N
L