Clip on the Door:
Take the door and with the Door
Mounting plates seat them into the rear of the Lever Arm and
then press down on front of the Lever Arm to clip them in.
(you may choose to install the carcass on the wall before clipping the
door and proceeding with final adjustments)
Adjust the Springs .
Using a cordless driver you can ad-
just the tension on each spring to function with the correct
weight of the door…
The ideal balance point is when the door will sit naturally at a 45 degree
opening angle .
Adjust the Door position.
The Lever Arms offer infi-
nite adjustment in 3 planes so you can ensure they look
perfect in your design. Adjust and check repeatedly until
you are happy with the final fit.
AVS:
Aventos HK Lift-up Cabinet (800mm)
5
You are now finished:
Simply clip the cover caps on and
your ready to enjoy your Blum Aventos unit!
Please email [email protected] if you would like further instruc-
tions regarding removal of door and how to fix the upper opening angle.
6
2
1
Take the LIFT mechanism
& seat
the two locating lugs (small indents) on
the two pre-drilled holes.
Unlock the Mech with CARE!
Identify the plastic locking clip—this is used to hold
the arm locked closed. Unclip this AND take care that the arm does not spring up caus-
ing injury. Once removed, carefully and deliberately open the Lever Arm ready for the
next step.
Pressing the unit firmly against the carcass you
can now screw the three fixing screws. Repeat
for both sides.
Using the locating lugs will ensure the mecha-
nism is in the correct position...
4
3
