pg. 8
Installation Instructions
1) Check Boxes for Correct Contents
2) Install Anchor Plate
Site Location
Select the location for the charging station. To mount the
charging station, first prepare a concrete pad properly
aligned to the parking space.
The concrete pad should be positioned such the distance
between the charging station and electric vehicle is
sufficient to minimize likelihood of damage (suggested
min. 3 ft).
Site Preparation
The Anchor Plate is 18 inches in height; therefore
it is recommended that the concrete pad is at
least 24 inches in depth (check local codes).
In preparation for the concrete pad, excavate to a
depth of 24 inches, length 18 inches
(recommended), width 18 inches (recommended).
Trench for electrical conduit. (check local codes).
Running the Conduit
To prepare the Anchor Plate for installation, run conduit through the anchor as illustrated in the
diagram. The conduit should run either through the side hole in the Anchor Plate post or through the
bottom of the post itself. The conduit should extend 2.5ft above the anchor plate (check local
codes).
