SEM 1201P, Operational & Maintenance Manual

Page: 14 / 36

For NATIONWIDE SERVICE call 1(800)225-9293
14
MANUAL OPERATION
Procedure Display
Turn on the breaker and press the upper
part of START key. The SHRED READY
screen appears.
Note: If idle for more than 5 minutes it
goes into the power save mode and all
power goes off. Press the upper part of the
START key again to restore.
Press the START key the cutters start
running and the screen changes as shown in
right.
Feed the paper straight forward into the
feed opening by aligning the center part to
the
AUTO START
MARK. When paper is drawing
into the shredder, remove your hands
immediately.
Shredding volume is displayed in 4 levels
as shown in the right.
●
It is recommended to shred the paper
with the volume of (a) to (c) levels.
●
If the paper to be shredded exceeds the
level (d), auto-reverse function may
work.
Note: Shred levels vary depending on the
paper quality and/or voltage fluctuation so
take these levels as a reference.