SEM 1201P, Operational & Maintenance Manual

Page: 13 / 36

For NATIONWIDE SERVICE call 1(800)225-9293
13
OPERATING PROCEDURES
Automatic Operation
Procedure Display
Turn on the breaker and press
the upper part of START key of
the shredder. The SHRED
READY screen appears.
Note: If idle for more than 5
minutes it goes into the power
save mode and all power goes
off. Press the upper part of the
START key again to restore.
Feed the paper straight forward
into the throat opening by
aligning the center part to the
AUTO START
mark. When paper is
drawing into the shredder,
remove your hands
immediately.
Shredding volume is displayed
in 4 levels as shown in the right.
●
It is recommended to
shred the paper
with the volume of (a) to
(c) levels.
● If the paper to be shredded
exceeds the level (d), auto-
reverse function may work.
Note: Shred levels vary depending
on the paper
quality and/or voltage
fluctuation, so take
these levels as a reference.
After using the shredder, turn
OFF the main breaker and pull
out the plug from the outlet.