Selve i-R Receive, Operating Instructions Manual

Page: 35 / 84

35
GB Transmitter programming procedure
1.2) Programming further transmitters/channels
Press the PROG button of a programmed transmitter/channel or
i-R Receive for 3 seconds (wait for confirmation: brief upwards
and downwards movement of the motor). The receiver remains
in programming mode for 1 minute. Briefly press (1 sec.) the
PROG button of the new transmitter/channel. The new trans-
mitter/channel has now been programmed.
1.3) Deprogramming transmitters/channels
Press the PROG button of a programmed transmitter/channel or
i-R Receive for 3 seconds (wait for confirmation: brief upwards
and downwards movement of the motor). The receiver remains
in programming mode for 1 minute. Briefly press (1 sec.) the
PROG button of the transmitter/channel you wish to deprogram.
The transmitter/channel has now been deprogrammed.
➡
✓
programmed transmitter/
channel
3 sec.
new transmitter/channel
1 sec.
➡
✓
programmed transmitter/
channel
3 sec.
transmitter/channel to be
deprogrammed
1 sec.