Selve i-R Receive, Operating Instructions Manual

Page: 28 / 84

28
GB Installation/Connection
Installation/Connection
Note:
Ensure that the controls are not installed and operated in the vicinity
of metal surfaces or magnetic fields. Metal surfaces or panes of glass
with a metallisation within the transmission path can reduce the
range considerably.
Radio sets transmitting at the same frequency could interfere with
reception.
It should be noted that the range of the radio signal is restricted by
legislation and constructional measures.
Safety instructions
• Risk of injury through an electric shock.
• Terminal connections must be carried out by an autho-
rised electrician.
• Only the back of the hand is protected by the device, no
protection against accidental contact.
• Do not bend, shorten or add extensions to the antenna.
• The programming button/ PROG must be operated with
an insulated tool (1 KV electric strength).
• If more than one motor is being controlled via the
i-R Receive/i-R Receive Compact, the motors must be
decoupled by relay controls. The switched current of the
device must be observed at all times.
Warning!
Warning!