SELVA MARINE Kingfish 25, Service Manual

Page: 310 / 398

9-20
9
Removing the upper case
1. Drain the remaining engine oil.
2. Remove the lower mount housings
1
,
and then remove the rubber dampers
2
and
3
.
3. Remove the ground lead
4
.
4. Remove the self-locking nuts
5
and
washers
6
, and then remove the upper
case assembly
7
.
5. Remove the bolts
8
, upper mount
9
,
plate
0
, and bolts
A
.
Installing the upper case
1. Install the plate
1
and bolts
2
to the
upper mount
3
, and then install the
upper mount assembly.
2. Tighten the bolts
4
to the specified
torque.
3. Install the upper case assembly
5
to the
bracket assembly
6
.
4. Install the washers
7
, and then tighten
the self-locking nuts
8
to the specified
torque.
5. Connect the ground lead
9
to the
bracket assembly, and then tighten the
grease nipple
0
to the specified torque.
4
3
2
1
2
1
7
5
6
6
Upper mount bolt
4
:
26 N·m (2.6 kgf·m, 19.2 ft·lb)
9
0
8
A
A
1
2
2
4
3
LT
572
LT
A A
Upper case and mounts (L-transom)