5. If the cabinet
HAS
magnetic sides,
skip this step.
If the cabinet
DOES NOT HAVE
magnetic sides, mount the SLX
Heartbeat Plate on the left-hand side
of the cabinet.
NB: To ensure the best possible
signal, the SLX Heartbeat Plate
should be mounted on the left-hand
side of the cabinet. The lower-left
corner should be about 2 cm from
the door and 4 cm up from the
bottom of the cabinet.
6. Connect the Sensor Eye in the Main
Unit.
7. Use the magnets on the back side of
the Main Unit to attach it to the
inside of the AED cabinet.
NB: To ensure the best possible
signal, the SLX Heartbeat Plate
should be mounted on the left-hand
side of the cabinet. The lower-left
corner should be about 2 cm from
the door and 4 cm up from the
bottom of the cabinet.
Make sure that the Main Unit is
installed so the cable jack for the
Sensor Eye points downwards.
SLX Heartbeat for Zoll AED Plus, Installation Guide (version 1.4, September 2020)
8 of 15
Summary of Contents for SLX Heartbeat
Page 1: ...Installation Guide...