Basic network settings
NETfon SIP - Administrator Guide 723142009-A0-GB
6
3.2.2. IP settings
WARNING!
If DHCP is disabled
, the administrator must manually provide to the configuration of the following data as
explained below:
•
Subnet Mask
•
Gateway IP Address
•
NETfon IP Address
•
TFTP Server Address
Sequence of operations from WEB pages
1
Perform a login to embedded WEB server from browser, entering the IP address of the phone
2
Enter the administrator’s password (default “1234”) and click LOGIN button
3
Click on the link <
Advanced setup
>
4
Click on the link <
WAN
> and enable/disable the radio button “
Dinamic IP Address
”
5
To send the customization, click on
Apply
button.
The change causes the restart of the phone
6
To exit the WEB Server, click on
Logout
button.
Sequence of operations from configuration file
NOT APPLICABLE
Sequence of operations from the phone menu
1
Press menu/enter button to enter the programming local menu, scroll the menu up to
SETTINGS
and press menu/
enter button to confirm
2
Scroll the menu items up to
SUBNET MASK
and press menu/enter button to confirm
3
Enter the administrator’s password (default “
1234
”) and press menu/enter button to confirm
4
Enter new IP address. The screen displays the following data:
Pay attention!
The cursor is positioned at the start of
New Value
and if you press menu/enter now, you will confirm
the empty value; in this case treat it as any other value.
To switch from the first block of numbers to second and so on until the fourth, press menu / enter and then return to
the Settings menu.
5
Scroll the menu items up to
GATEWAY IP ADDRESS
and press menu/enter button to confirm
Summary of Contents for NETFON 100
Page 1: ...AdministratorGuide NETfon 100 300 500 SIP ...
Page 4: ...Index NETfon SIP Administrator Guide 723142009 A0 GB II ...
Page 20: ...Advanced settings NETfon SIP Administrator Guide 723142009 A0 GB 16 ...
Page 54: ...Appendix E Advanced network settings NETfon SIP Administrator Guide 723142009 A0 GB 50 ...
