DT-E 1.4: SUN PROTECTION SCREEN – VENETIAN BLINDS Z90
Issue 2 / April 2017 / EN
page 47 / 58
14.
Immobilise the ends of guiding profile with silicone
installation glue or silicone hot glue
Img. 7
NOTE:
Make sure that the guiding profile is placed
against guide rail end cap. Its upper part should freely
protrude from the guide rail in the cassette.
Fig. 19
15.
Connect feeder cable to the Venetian Blind and
check the correctness of system functioning and
setting end positions. Correct if necessary.
NOTE:
Connection of the feeder cable should be placed
in the marked spot in the cassette in a manner enabling
maintenance. Cable should be placed in such a way so
that no water gets to the motor.
Feeder cable has to be passed through cassette end-
cap.
Fig. 20
16.
Wind the Venetian Blind to the top position, the
bundle has to completely hidden in the under-plaster
cassette.
Fig. 21