DT-E 11.8.1 TERRACE AWNING CASABLANCA
Edition: March 2016 / Issue 1
English
page 9 / 19
3.4
General guidelines for installation
The wall brackets should be installed on the back side of the cassette, on places marked by
the manufacturer (so that they are placed on the axis of arm brackets),
To avoid the risk of hand and fingers harm during opening and closing of the awning, the
awning should be installed on such height so that the lowest element of the awning after it is
opened is at least 2200mm above the ground,
The product should be protected against any stains made by e.g. silicon, mortar or mounting
foam, which may cause its damage,
Using any chemical substances containing bituminous substances or any other substances
making reactions with the product is forbidden,
In case of installation in public places, e.g. hospitals, schools, boarding schools etc. The
placement of switch/remote control device should be marked according to health and safety
regulations,
In case of remotely operated awning, bracket for remote control should be installed in place
not available for children,
Electrical installation, first programing of motor and specialized service can be conducted
solely by specialized service companies.
Awning installation, adjustment and test its testing can be carried out by service crew
or trained persons only. Person conducting the installation and first run is responsible
for appropriate fixing of the awning including fixing elements, allowing for its correct
operation and parameters.
Improper installation may cause hazardous situation for the user.
3.5
Installation tools
drills,
hammer drill,
ladder/scaffolding,
screw-driver,
hammer,
measure tape,
pencil/marker,
spirit level,
ring and flat
wrenches,
Allen keys,
anchors.
