background image

Fil-Pilote Comfort Night Antifreeze

Chrono

ECO

Adaptive starting

control

Open window

system

Key lock

ASC

2. “COMFORT”

“NIGHT” MODES

AND

Two different levels of temperature can be set:
-"COMFORT" temperature: It is the temperature used for "Chrono", " Fill pilot" and "Comfort" modes.
-"NIGHT" temperature: It is the temperature used for the "Night" and "Chrono" modes.
The desired temperature can be set pressing the [+]

[-] buttons. The range of configurable temperature is

or

7°C- 32°C.
IMPORTANT!
The temperature of "Night" mode must be below to the “Comfort” mode temperature. For this reason, the “Night”
mode temperature can be set to a value between 7°C and the "Comfort" mode temperature.
The "Comfort" temperature can be set throughout the range of 7 ° C to 32 ° C. If "Comfort" temperature is set
below "Night", the latter is set equal to the first

3. THERMOSTAT FUNCTIONS AND MODES

An icon on the display indicates the current operating mode (see table).

Mod Fil-Pilot

e

e

It is the mode in which the radiator is controlled by a remote-control unit.
1. Press the [mode] button until the "Fill-Pilot" icon is displayed.
2. Set the desired temperature through the [+] and [-]
The mode of operation will be selected by the Fil-Pilot Control Center.

The device operates with the most advanced "Fil-Pilot" system with six commands, which
allows the following functions:

Standby: power off the heating element, the device remains active.
Comfort: maintains the "Comfort" temperature set by the user.
Eco: maintains the room temperature 3,5°C below the "Comfort" temperature.
Anti-freeze: maintains the room temperature at 7°C.
Eco-1: maintains the room temperature 1°C below the "Comfort" temperature.
Eco-2: maintains the room temperature 2°C below the "Comfort" temperature.

Comfort Mode

It is the normal use of the radiator to maintain the room temperature to the set value.
1. Press the

button until the corresponding icon appears on the display.

[mode]

2. Select the desired temperature with the

and

buttons.

[+]

[-]

Selmo

Electronic

Via Pacinotti, 24 - 35030 Rubano

www.selmo.it

(PD) Italy- Tel 049.8976761, Fax 049.8976085 -

Selmo

Electronic

Via Pacinotti, 24 - 35030 Rubano

www.selmo.it

Rev.02 - June 2018

“Infinity PLUS”

Electronic control for electric radiators

Comfort technology division

Selmo

EN

Summary of Contents for Infinity PLUS












Reviews: