13
2.3. Safety symbols and plaques
The machine has a number of plaques with symbols
and/or safety messages stuck to it.
Attention
Make sure that all the safety messages are
legible and in good condition.
Replace the damaged plaques with the new ones from
the manufacturer. If a plaque happens to be on a part
that is being replaced, make sure that a plaque is
present on the new piece. For the cleaning of the
plaques consult the appropriate section (6.3).
ATTENTION
THE PERFORMANCE OF WORK ON ELECTRICAL EQUIPMENT
CONNECTED TO THE POWER SUPPLY IS STRICTLY
FORBIDDEN
ANY EXCEPTIONS MUST BE AUTHORIZED BY THE
EXECUTIVE MANAGER
IN PARTICULARLY DANGEROUS SITUATIONS, ANOTHER
PERSON MUST BE PRESENT IN ADDITION TO THE
PERSON PERFORMING THE WORK
WORK MAY ONLY BEGIN WHEN THE SAFETY MEASURES
HAVE BEEN IMPLEMENTED
IN OBSERVANCE OF PRESIDENTIAL DECREE 543 ON THE
PREVENTION OF ACCIDENTS
(positioned on the door of the electrical panel)
Label indicating compulsory reading of the manual
(positioned on the front of the machine)
2.4. Safety and protection devices
Attention
The components shown here are particularly
important for safety. In cases of malfunction or wear
and tear they must be replaced with spare parts
supplied or authorized by the manufacturer.
While the machine is in use all the protection features
must be correctly installed.
The safety devices present on the machine are:
Emergency push button with mechanical unblock
mechanism.
Restart button
The relay provides power to the machine and it is
deactivated when the emergency button is pressed or
when there is a mains power failure.
To activate it press the black reset button located on its
side.
