7
BATTERY
• Charging Light Indication: When the scale is charging the charge light
will turn Red. When the battery is done charging the charge light will
turn Green. To fully charge the battery plug in for about 12 hours.
ALARMS
Overloading alarm
• When the load on the platform is over 9d of the scale’s maximum
capacity, a beep will sound to alert you to remove the load from the
platform immediately The display will show “
EEEEEE
”
Sample Number Alarm
• If the total weight of your sample is below limit value, it will indicate
lack of sample
Quantity Check Alarm
• When the quantity check function is on and you are over or under the
scale’s limitation the scale will emit beeps to warn you
• Short sounding beeps: if the quantity is over the upper limitation
• Long sounding beeps: If the quantity is less than the lower limitation
TROUBLESHOOTING
“
ADL
---” - the weight is under the set division
“
ADH
---” - the weight is over the set capacity, please remove all weight
“
AD-OVER
” - the weight is over the scale’s capacity, please remove all weight
from the scale immediately!
• Please check to see if the plate is in place properly and the scale is level
• If error persists please contact the dealer
When powering on if the display shows “Error Vol 500” before auto-checking,
the present voltage is 5.0V and the scale cannot be turned on.
• Charge the scale with the included charger and do not use until the
voltage reads 5.3V when you power on the scale
• If error persists please contact the dealer
