6
Quantity Check Alarm
• When counting you can set a quantity limit alarm by setting limits
• This function allows you to set an alarm when there are too many or
too few pieces on the scale. For example you can set an alarm to go off
when you have under 10 units on the scale or an alarm when you have
over 100 units, or both at the same time
• Press [QUANTITY CHECK] key to enter the quantity check setting mode
• Turn this function On or Off by pressing the [ZERO] key
• To set a Low alarm press [M+] and enter the amount you want to set as
your lower alarm (entering 0 disables low alarm)
• To set a High alarm press the [M+] Key again and enter the amount you
want to set as the high alarm (entering 0 disables high alarm)
• Press [M+] again to save the alarms and exit quantity check setting
mode
