INSTRUCTION MANUAL
SERIES: FAME2
ATTENTIONS
Read these instructions completely and carefully.
1
www.self-electronics.com
2
www.self-electronics.com
• Read the instruction carefully before installation
，
non-observance of this instruction may cause damage to the fixture or hurt
to human body. The installation must be carried out by a qualified electrician in accordance with local or national codes.
• Cut off the power supply before installation, maintenance or cleaning.
• Regularly check the light source , the LED power supply, the cord and other accessories. If any part is damaged, the product
should not be used.
• Only those open holes indicated in the photographs and/or drawings may be made or altered as a result of kit installation.
Do not leave any other open holes in an enclosure of wiring or electrical components.
• Keep this instruction manual handy for future use.
• The light source of these product are non-changeable light diodes(LED).
Do not disassemble the product, as the light diode can cause damage to the eyes.
WARNING
- Risk of fire or electric shock. LED Retrofit Kit installation requires knowledge of luminaires electrical systems.
If not qualified, do not attempt installation. Contact a qualified electrician.
WARNING - Risk of fire or electric shock. Install this kit only in the luminaires that have the construction features and
dimensions shown in the photographs and/or drawings.
WARNING
- Risk of fire or electric shock. Luminaire wiring and electrical parts may be damaged when drilling for installation of
LED retrofit kit. Check for enclosed wiring and components.
WARNING
- To prevent wiring damage or abrasion, do not expose wiring to edges of sheet metal or other sharp objects.
CAUTION
- To reduce the risk of fire, do not install in a compartment smaller by L1 inches
by 15-3/4 inches by 15-3/4 inches.
AVERTISSEMENT
- Afin d’éviter tout risques d’incendie, ne pas installer dans un compartiment plus
petit par L1 inch, par 15-3/4 inch, par 15-3/4 inch.
L1 see form
①
.
Use only with SELV power supply or Class 2 power supply (For USA market)
Dimension: (Inches/mm)
LED LAMP (Center)
LED LAMP (Side)
LED DRIVER
Components:
Wire twist
connector
Screw
Form
①
)
1
.
1
4
(
”
8
/
5
-
1
)
7
.
1
7
7
1
(
”
4
/
3
-
9
6
1/16”(50.8)
2”(50.3)
1”(25.4)
2-3/8”(60.3)
69-3/4”(1771.7)
Rated
Input
Minimum Mounting
Space(L1XWXH)
Model
Ta
Environment
Damp
locations
-13°F...+95°F
(-25°C~35°C)
Length
(L)
Wattage
(W)
Locations
24VDC
FAME2-L126-24V
FAME2-L126-24V-1
FAME2-L252-24V
69-12/16''
(
1771.7
mm)
17.6
17.6
35.2
70-14/16''x15-3/4''x15-3/4''
(1800x400x400)
Left
Right
Center
FAME2-L84-24V
FAME2-L84-24V-1
FAME2-L168-24V
8.8
8.8
17.6
Left
Right
Center
Version
High power
Standard
power
